Successful ACCP Level II certification candidates must complete the following four examinations.
The multiple choice Level II general exam covers the basics within a method as listed in SNT-TC-1A, latest edition. The general exam is the same for all sectors for any one method.
The specific exam determines the certification sector. ASNT currently offers a specific examination for the General Inspection and Pressure Equipment sectors. This exam is also multiple choice.
In the instruction prep exam, candidates prepare NDT instructions to meet the requirements of a supplied code.
The practical exam determines the certification technique. Candidates can choose one or several techniques within each method.
Level II Reference Materials for Exam Preparation
The table below lists each examination now available under the ACCP Level II certification program. For certification in any method, candidates must successfully complete each of the three computer-based testing examinations and at least one of the practical examinations. For transitions and 10-year renewals, candidates must test one part per Technique with a minimum of two parts per Test Method.
Magnetic Particle Testing (MT) |
||
Exams |
Number of Items |
Time |
Instruction Preparation Exam |
20 Short Answer Questions |
1 Hour |
MT Specific Exam |
40 Multiple Choice Questions |
2 Hours |
MT General Exam |
50 Multiple Choice Questions |
2 Hours |
Practical Exams |
Bench: 2 pieces Yoke: 2 pieces |
1 Hour 1 Hour |
Liquid Penetrant Testing (PT) |
||
Exams |
Number of Items |
Time |
Instruction Preparation Exam |
20 Short Answer Questions |
1 Hour |
PT Specific Exam |
40 Multiple Choice Questions |
2 Hours |
PT General Exam |
50 Multiple Choice Questions |
2 Hours |
Post-emulsifiable |
2 Parts | 1.5 Hours |
Solvent-removable |
2 Parts | 1 Hour |
Water-washable | 2 Parts | 1.5 Hours |
Radiographic Testing (RT) |
||
Exams |
Number of Items |
Time |
Instruction Preparation Exam |
20 Short Answer Questions |
1 Hour |
RT Specific Exam |
40 Multiple Choice Questions |
2 Hours |
RT General Exam |
50 Multiple Choice Questions |
2 Hours |
Gamma (RAM) w/film interpretations |
2 Gamma Setups | 2 Hours |
X-ray w/film interpretations |
2 X-ray Setups | 2 Hours |
Combo (Gamma & X-ray) w/film interpretations | 1 Gamma and 1 X-ray Setup | 2 Hours |
Film Interpretation (taken with RT exams) | Review 26 RT film | 2 Hours |
Ultrasonic Testing (UT) |
||
Exams |
Number of Items |
Time |
Instruction Preparation Exam |
20 Short Answer Questions |
1 Hour |
UT Specific Exam |
40 Multiple Choice Questions |
2 Hours |
UT General Exam |
50 Multiple Choice Questions |
2 Hours |
Castings/Forgings |
2 Parts | 2 Hours |
Straight & Angle Beam (Welds) |
2 Areas of Interest | 2 Hours |
Visual Testing (VT) |
||
Exams |
Number of Items |
Time |
Instruction Preparation Exam |
20 Short Answer Questions |
1 Hour |
VT Specific Exam |
40 Multiple Choice Questions |
2 Hours |
VT General Exam |
50 Multiple Choice Questions |
2 Hours |
Direct |
2 Parts | 1.5 Hours |
Remote |
2 Parts | 1.5 Hours |
Schedule your examination online or by phone. When scheduling online you will need to create an account including login and password with Pearson Vue. You will be able to pick a site that is close to you, including any ASNT’s Authorized Exam Center (AEC) locations. For more information on scheduling please see our computer-based testing FAQ.
All of the ACCP Level II practical examinations may be taken at any of ASNT's Authorized Examination Centers. See the ASNT Exam Partners page for a list of AECs in the US and around the world.
Personnel that fail an examination will be sent an analysis sheet showing the percentage of questions missed in each major category of the Body of Knowledge for that examination. Personnel that successfully complete all qualification examinations will be sent an ACCP Level II wall certificate and wallet card showing the applicable test methods and techniques but will not receive an analysis sheet.